Aqualube 3000 Concentrate
A fluoropolymer based lubricant designed specifically for use as a sizing lube for Hi-Tek coated bullets.
To reduce the shipping cost, Aqualube 3000 Concentrate is sold as a non-flammable water based concentrate.
The pre-measured concentrate needs to be further reduced with a solvent. Denatured alcohol is preferred. Isopropyl alcohol (rubbing alcohol) can be used with good effect as well. Acetone also works well but tends to evaporate faster. Add solvent based on volume of mixture being made as per mixing instructions.
Once solvent is added, solution becomes a Flammable Liquid.
After dilution, simply spray a light coat on to the bullets to be sized. Aqualube 3000 dries to a clear slick film.
Like all Hi-Tek products a little goes a long way.
Sold in three sizes
100ml - makes 2 liters after Dilution
200ml - makes 4 liters after Dilution
900ml - makes 18 liters after Dilution
I decided to try the bullet lube & it makes sizing a lot easier. It is easy to use. Just spray it on let it dry & size the bullet. I was greatly impressed with the ease of sizing. Try it you’ll like it. Jeff Bentley on Feb 5th 2021
I was having a lot of trouble sizing uncoated bullets. This really made it a lot easier. super slick! The best part is I don't have to worry about having to remove it. Benny Ritter on Apr 15th 2020
Best stuff ever for pistol cases and coated bullets Tom Drum on Jun 15th 2019
Like a hot knife through butter! Unknown on May 2nd 2019
When applied to larger caliber bullets, it makes it so much easier to size It is clean to use.. Darren Wells on Oct 10th 2018
Good product , doesn't leave any sticky residue on the bullet. Unknown on Dec 2nd 2016