Aqualube 5000 Concentrate
A fluoropolymer based lubricant designed specifically for use as a sizing lube for Hi-Tek coated bullets.
Aqualube 5000 helps reduce the effort needed to size coated bullets. Especially useful for large diameter bullets and bullets with long driving bands.
Aqualube 5000 will not harm cured coatings. Hi-Tek can be applied over Aqualube 5000 if necessary.
To reduce the shipping cost associated with flammable liquids we've packaged Aqualube 5000 as a non-flammable water based concentrate.
The pre-measured concentrate needs to be further reduced with a solvent. I prefer and recommend denatured alcohol. Isopropyl alcohol (rubbing alcohol) can be used with good effect as well. Acetone also works well but tends to evaporate faster. Fill bottle to bottom of the neck with solvent of your choice and shake well.
After dilution, simply spray a light coat on to the bullets to be sized. Aqualube 5000 dries to a clear slick film. Aqualube 5000 does not contaminate the powder.
Like all Hi-Tek products a little goes a long way.
Commercial casters call or e-mail for bulk/quantity pricing.