Hi-Tek Supercoat Powder - 15 oz. Container

Write A Review

1. Keep the lead out!

   Hi-Tek works great to encapsulate lead bullets and it is a huge time saver compared to using my Lube sizer. Just be sure to keep your application bottle, mixing container and drying pans clean! The old dried material will dissolve but then causes bullets to be rougher. Also this recommends NOT sizing before applying the product. I typically size using a Lee sizer die before applying the first coat and after applying the last coat and I've never had adhesion problems. I use a nonstick oven sheet in the pan in my dedicate toaster oven and that works great.
   Dan Shiley on Dec 1st 2020

2. Awesome

   I came from standing all of my bullets up and powdercoating them with an electrostatic powder gun from HF. Hi-tec saves so much time, bigger batches, less work and my bases are coated now. Love it. I wish I would of bought sooner. Brekken on Nov 24th 2020

3. Works great. A little goes long way

   This coating works great and is easy to use. Just make sure to follow the directions which are included. I mixed up 300ml worth and coated just over 500 405gr 45-70 bullets and about 600 160gr 38/357 bullets. I coated all with 3 coats and had just a little over half what i mixed left. Will on Nov 6th 2020

4. Good product

   Tru blue is very temp sensitive. Turn green easily. Got to watch temp. Excellent bullet coating. Also used old gold with excellent results. Darren on Jul 1st 2020

5. Good stuff

   Been useing candy apple red know chips at all keep up the good work Mike Russo on Jun 22nd 2020

6. Fantastic Product

   This coating works really well. I’ve coated many thousands of bullets using it and I’ve always had excellent results. Greg B on Jun 19th 2020

7. Great Product - Great Company

   I cannot say enough good things about Hi-Tek coatings or the company that distributes it here in the USA.
   
   As easy as these products are to use, sometimes a little help can go a long way. Donnie answers the phone and gives great advice when problems arise. This is the hallmark of a great company - pride in their product and an understanding of how it is applied.
   
   The Hi-Tek coating itself is easy to use. Just follow the instructions and you’ll find that there’s a reason why so many commercial manufacturers of lead bullets here in the U.S.A. use this process for lubrication – it’s fast – it’s easy – and it shoots well.
   
   Lone-Star-Gazer on Jun 19th 2020

8. Great product

   The product works just like they said it would all You have to do is follow the instructions not difficult and turned out fantastic Bob on Jun 11th 2020

9. Outstanding Product

   We have been using this for a few years now and after a short learning curve if you take the time to do it right and store it properly it is a no fail process and a no fail coating. With proper bullet sizing, not rushing the drying time and paying attention to the oven temperature you get exactly what it is supposed to do. My granddaughter and I shoot every day and we get more time on the range and less time cleaning guns. We also get more time to maintain our brass. As an added bonus they sure do look good which adds confidence to our game. Cindy L on Jun 9th 2020

10. Great product and great service

    Outperforms powder coating in accuracy and ease of use. Always willing to answer questions and super fast order fulfillment.cut down on cleaning frequency Cindy L on May 11th 2020