Hi-Tek Heat Set Supercoat in a powdered format. Same product as the liquid version but in an easy to use powder.
Hi-Tek powder is built with the latest generation resins and has the 2-extreme catalyst built in. To use, simply measure out the appropriate amount of powder and add Acetone or M.E.K. (7 ounces of powder makes up to 32 fluid ounces of bullet coating).
Complete instructions are included.
I haven’t got a chance to use it yet but it showed up fast. Richard M. on Apr 24th 2021
I have been casting bullets for over 35 years. Hi-tek Super coating changed my way of doing bullets totally, once I tried it I have never looked back. Great performance and low cost per bullet. Thanks. Roger Wheat on Apr 5th 2021
I run two coats. Then run them through the sizing die and another coat. They look good and no leading. Mark T. on Mar 26th 2021
I haven't shot any yet, but they seemed to have a very nice even coat and didn't add a lot of thickness. They look much better than my powder coating. Some batches came out a little darker, but I'm sure that is my fault for cooking them in a small toaster over with uneven heating. There wasn't any noticeable difference in the coating durability though. Dave on Mar 22nd 2021
I am very impressed with this bullet coating. Far better than powder coating. I nailed it first try!
I used two coats, and everything looks great! Randy on Mar 14th 2021
Wish I could put more down about this product but, I have not been able to shoot any of my coated bullets yet. As far as the process though it has been easy to do. I have used the bronze coating on my 9mm bullets and the cherry red on my 45acp's. Follow the directions and if in doubt go to you tube where you can find videos on the stuff. I just read the directions and it worked as described. The rub test and the hammer test I passed without any issues. I would say to err on the side of thinner coats and just use 4 coats if you really want the color to stand out. Oh and SIZE after you coat your bullets. I ran 450/9mm through my sizer and lost zero coating. If anything it burnished the coating to a smooth glass like finish. Beats the wax lube into the ground IMHO. Richard O Dunham on Feb 16th 2021
I was very hesitant on switching from powder coating. So glad I tried this out. Took very little to get it dialed in. So much adhesion it's super durable. First weekend with this I was able to coat nearly 2 thousand 9mm and 40cal bullets. Hats off to these guys. Super fast shipping. I ordered this on a Sunday Evening and was coating bullets before the next Saturday. Even with covid shutting others down Hi Tek delivered. Definitely a customer for life. Kurt Miller on Feb 8th 2021
Coats good does what it supposed to Loren Logsdon on Feb 6th 2021
The product is very easy to use if you follow the directions. This was the first time I e coated the bullets and they turned out great. Allen was very helpful and had the product out the door and shipped the day I ordered it. I’ve shot 10’s of thousand of coated bullets primarily Bayou bullets and loved them but with this darn Covid it is getting harder to get bullets in a timely manner and Hi-Tech is the answer. If you have a source for quality lead bullets you have to try this coating, you’ll love it. David on Jan 28th 2021
Less is better. After first coat, they didnt look like they changed color alot while drying buy after 10 min in the oven dramatic difference. Didnt need 3 coats but did it anyway. Great stuff Charles L Wiley on Jan 26th 2021