Hi-Tek Supercoat Powder - 7 OZ. Container

Write A Review

1. Zombie green

   I bought zombie green am very pleased with it other then burning my first batch at 395 degrees so just watch when baking 10 minutes is to long eric on Aug 24th 2016

2. THIS IS EASY

   I own a small reloading supply. This is my second purchase of Hi-Performance Bullet Coating. I found application is much easier than I expected. Watching the You-tube video was a big help. What I have seen in performance is exceptional. Coated bullets are every bit as good as plated bullets with a lot less cost. I have experienced no barrel leading and shoot 9MM at about 1200FPS. I also use it on a 30 caliber, 225 grain bullet we load in sub-sonic 300 Blackout. Customers are always commenting on the appearance of the bullets. I highly recommend this product. Don Perryman on Aug 22nd 2016

3. Hi-tek

   Very easy to use,have not had a chance to shoot the bullets,but they look great. Thomas on Aug 17th 2016

4. better than lubing

   I have been casting bullets for 25 years and this stuff is great !
   No messy lube , higher velocities with no leading and no smoke Kelly Niffenegger on Jul 31st 2016

5. Excellent bullet coating

   have now purchased 4 different colors for bullet coating & am very impressed with product. I will buy more. Unknown on Jun 28th 2016

6. Great Product!

   Just switched over from powder coating to Hi-Tek Super coat powder (Zombie Green) and it's great! Much easier to apply than powder coat and goes on smooth and evenly. I'm still dialing in my application process, and whether to use 2 or 3 coats, but I'll be sticking with this stuff for sure!!! Also super fast shipping even over Memorial Day weekend. Two thumbs up!! Eric on Jun 2nd 2016

7. Less work more shooting

   I started out with the liquid red copper coating on some 240 grain 44 cal. bullets that require a gas check. I'm now coating for 44 mag. - 45 acp. - 45 colt and 38/357 I have seen no leading with loads under 1200 fps. I found several light coats baked at 385 degrees for 12 min. works best for me. Yesterday I mixed up my first batch of the green powder and am happy to report it seems to work well also.
   I found that having several drying trays and two or three oven trays speeds things up. I coated a little over 1200 bullets with three coats in less than an hour this morning.
   I also noticed that you must bell the mouth of the case a bit more when loading for best results.
   
   
   Lew Med on May 30th 2016

8. powder coat

   Good stuff coated a few hundred bullets a lot faster than waxing plan to order more in the future john on May 10th 2016

9. Good stuff

   Just coated a few trays of bullets with the zombi green powder - much easier to mix than the liquid version with no shaking color can or trying to accurately measure at the correct ratios (and that fricking catalyst smelled like a**) PLUS its a heck of alot cheaper to get shipped. Ive been shooting my own hi-tek coated bullets out of a glock 19 and 21 for a little better than a year with great results ,I do get a very small amt of leading after 300 or 400 rds (if i let them go that long without cleaning) but hit it with some chore boy on a brush and we're good to go again. Great Product! Wayne M on Feb 7th 2016

10. The best on the market by far (7 stars out of 5)

    I have been casting for a long time, and wanted to get away from the traditional sizing and lubing, this takes a long time and is messy. I have tried several different ways to coat my cast lead bullets, from wet powder coat to dry powder coat and had some good results. I decided to try the Hi-Tec powder after seeing a few videos about the 2 part liquid coating. I ordered a 7oz jar of the Hi-Tec powder to try out hoping to find a faster and easier way to coat my bullets. I am sure glad I did, the Hi-Tec coating (powder) is by far the easiest, cleanest, and fastest way to coat you bullets. When they say a little goes a long way, they mean it, I mixed up 3 table spoons of the powder and was able to coat, with 2 coats, approximately 2200 bullets. I would highly recommend this coating to anyone that wants to get away from the traditional size and lube of cast bullets. This stuff is faster, smoother, and nicer looking than powder coat. I will be getting more and using it for all my cast bullets. Joe M on Jan 12th 2016